1000kW Generator Rental (1,250kVA)

1000kW Generator Rental (1250kVA) Features 

• Engine EPA approved engine 
• Air cleaner – single element canister type with service indicator  
• 45-Amp charging alternator  
• Fuel filters – primary and duplex secondary with integral water separator and change-over valve  
• Lubricating oil system Jacket water heater  
• Fuel cooler and priming pump  
• Generator Multi-voltage, dual-frequency brushless, three-phase, 12-lead design  
• Permanent magnet excited  
• Digital Voltage Regulator  
• Space heater  
• Class H insulation operating at Class F temperature for extended life  
• Containerized 30′ ISO high cube container 
• CSC certified Module 2-axle 
• 30′ ISO container chassis  
• Sound attenuated air intake louvers and 3 lockable personnel doors with panic release  
• Bus bar access door 
• External access load connection bus bars  
• Shore power connection via distribution block connections for jacket water heater, battery charger, space heaters, and generator condensate heaters  
• Standard lighting 3 AC/3 DC, one (1) single duplex service receptacle 
• 2 external break-glass emergency stop pushbuttons  
• Fuel tank UL listed, double wall, 23.5 hr runtime @ 75% of 60 Hz prime-rated load  
• Sound attenuated 72 dB(A) @ 15 m (50 ft) 
• Spill containment 110% of all onboard fluids  
• Oversized maintenance-free battery, battery rack, and 20-Amp battery charger  
• Critical grade internally insulated exhaust silencer  
• Vibration isolators 
• Corrosion-resistant hardware and hinges  
• External drain access to standard fluids  
• Standard cooling provides >45° C ambient capability (50 Hz) or 43° C (60 Hz) at a prime +10% rating  
• Engine mounted, 38 splits JW/CAC vertical radiator 
• Vertical air discharge, and fuel cooler  
• Generator Custom switchgear control with automatic start/stop & cooldown timer  
• Paralleling Control Protection: 32, 59, 27, 40, 810, 81U, 40, complete with device 15, 25, 65 & 90  
• Reverse compatibility module provided for interface to legacy power modules  
• Touch screen controls with event log Multi-mode operation (island, multi-island, and utility parallel), load sharing (multi-unit only)  
• Import & export control (utility parallel only) 
• Manual and automatic paralleling capability  
• Touch screen display (status and alarms)  
• 3000-Amp circuit breaker 
• UL listed 
• Electrically operated, fixed mounted, 3-phase, 50% rated neutral bus  
• Metering display: voltage, current, frequency, power factor, kW, WHM, kVAR, and synchroscope  
• 3000-Amps reconnectable link board for 208/240/400/480V – wye configuration 
• Generator mounted controller provides power metering, protective relaying, engine, and generator control and monitoring.  
• Provides MODBUS datalink to paralleling control for monitoring of engine parameters.  
• Convenient service access for service tools (not included).  
• Integration with the DVR provides enhanced system monitoring.  
• Ability to view and reset diagnostics of all controls networked on J1939 datalink.  
• Network modules via the control panel remove the need for a separate service tool for troubleshooting.  
• The real-time clock allows for date and time stamping of diagnostics and events. 
• Graphical display with a positive image, transflective LCD, adjustable white backlight/ contrast.  
• Two LED status indicators (1 red, 1 amber).  
• Three engine control keys and status indicators (Run/Auto/Stop).  
• Lamp test key.  
• Alarm acknowledgment key.  
• Display navigation keys.  
• Two shortcut keys: Engine Operating Parameters and Generator Operating Parameters.  
• Fuel level monitoring and control. 
• 3000A fixed type, 3 poles, genset mounted, electrically operated, insulated case circuit breaker.  
• Solid-state trip unit for overload (time overcurrent) and fault (instantaneous) overcurrent protection.  
• Includes DC shunt trip coil activated on any monitored engine or electrical fault, 100 KA-interrupting capacity at 480 VAC. 
• Generator mounted automatic voltage regulator, microprocessor-based.  
• Manual raise/lower voltage adjust capability and VAR/power factor control circuitry for maintaining constant generator power factor while paralleled with the utility.  
• Includes RFI suppression, exciter limiter, and exciter diode monitoring.  
• Voltage and power factor adjustments are performed on the setting screen of the HMI touch screen. 
• Three-phase, plus full rated neutral, bus bars are tin-plated copper with NEMA standard hole pattern for connection of customer load cables and generator cables.  
• Bus bars are sized for a full load capacity of the generator set at 0.8 power factor.  
• Includes ground bus, tin-plated copper, for connection to the generator frame ground, and field ground cable. 
• Requires 240 VAC for all module accessories.  
• Includes controls to de-energize jacket water heaters and generator space heater when the engine is running. 
• 3000A link board for 208/240/400/480 – wye operation.  
• Reconnection via movable jumpers in the link board.  
• Includes switch to determine the mode of operation and to enable an overcurrent relay included in 480V operation. 
• Three (3) internal DC lights with one (1) timer installed at each side of the container door.  
• Three (3) internal AC lights.  
• One (1) single duplex service receptacle. 
• 24 VDC/20A battery charger with float/equalize modes and charging ammeter.  
• Maintenance-free batteries. 
• UL listed 1250 gallon double walled.  
• Fuel transfer system. 
• Utility paralleling controls are intended for automatic or manual paralleling with a utility power source as a load management system, with provisions for standby operation feeding an isolated load network. Load management operation involves microprocessor-based automatic loading controls with soft loading, baseload, Import/Export control, and soft unloading. For Standby operation, the generator operates as an isochronous machine isolated from the utility supply. The controls allow for automatic operation, initiated locally or remotely by the customer’s SCADA system.